Time:2024.12.04Browse:0
Analysis of UPS power button battery cr1620 recycling price and utilization process
UPS power button battery cr1620 recycling price and utilization process, UPS power button battery cr1620 has a history of more than 150 years. It is a type of button battery cr1620 with large production, wide application and large environmental impact in the world. Used waste lead-acid batteries are "waste" in the eyes of many people. Although more than 70% of waste lead-acid batteries can be re-refined and reused, and the "gold content" is full, its actual utilization rate is not high. The button battery cr1620 is a device that directly converts chemical energy into electrical energy. It is a button battery cr1620 designed for rechargeability and recharged through a reversible chemical reaction. It usually refers to lead-acid batteries, which are a type of button battery cr1620 and belong to secondary batteries. UPS power button battery cr1620 recycling price UPS power button battery cr1620 recycling price is about 8650-9650 yuan/ton. The price of UPS power batteries fluctuates greatly, so it is useless to ask about the price. The old batteries are weighed. Since October 2016, the price of lead, the raw material for batteries, has risen rapidly. Both the prices of new and old batteries have skyrocketed. Now the price of lead is still not very stable. For specific prices of old batteries, you still need to consult a company that specializes in recycling old batteries. And the more old batteries you have to deal with, the higher the price will be. UPS power button battery cr1620 recycling process 1. Use special environmentally friendly vehicles to transport the waste UPS power batteries to the smelting plant warehouse; 2. Pour the electrolyte of the waste lead-acid button battery cr1620 into the sedimentation tank for drug treatment; 3. Disassemble the waste lead-acid button battery cr1620 and send the shell to the plastic recycling plant for professional treatment; 4. Sorting the partitions of the waste UPS power batteries and sending them to professional factories for recycling; 5. Send the sorted waste plates to a large reverberatory furnace for smelting and make lead ingots for recycling; 6. The waste water generated during the smelting process flows into the sedimentation tank and is treated with drugs together with the electrolyte; 7. The waste slag generated during the smelting process is sent to a professional ironmaking plant for treatment; 8. The waste smoke generated during the smelting process is treated by a bag dust removal device and safely discharged. At this point, the environmental protection recycling process of waste UPS power batteries ends. How to deal with UPS batteries after they are scrapped? Non-destructive repair technology. With the birth of "non-destructive repair technology for waste lead-acid batteries", the pollution of the environment by waste lead-acid batteries may be curbed and reversed. It is understood that the technology uses electronic pulse frequency sweep oscillation technology, and uses physical and electronic methods to solve problems that could not be solved by chemical methods in the past. Application of "full wet method". It is understood that at present, only four companies in China have introduced the "half-water wet and half-fire" treatment method, but it will still cause a certain degree of lead pollution and sulfur dioxide pollution, while other treatment companies generally adopt simple furnaces, axe chopping, fire and other methods to treat. The problem of button battery cr1620 recycling is that the recycling system has not yet been formed. At present, most power batteries have not been retired, and there is no effective cooperation mechanism between automobile production, button battery cr1620 production, and comprehensive utilization companies. At the same time, in terms of implementing the extended producer responsibility system, it is necessary to further refine and improve the relevant legal support; second, the recycling technology capacity is insufficient. At present, the company's technical reserves are insufficient, and key common technologies and equipment such as power button battery cr1620 ecological design, cascade utilization, and efficient extraction of valuable metals need to be broken through. There is a lack of standards for the discharge, storage, and cascade utilization products of retired power batteries; third, there are few incentive policies and measures. Affected by technology and scale, the current market recovery of valuable metals is not profitable and economical. The relevant fiscal and tax incentive policies are not sound, and the market-oriented recycling mechanism has not yet been established. Used UPS power batteries cannot be discarded casually. Used batteries must be properly handled to significantly increase the recycling rate of used UPS batteries, extend the service life of batteries, and reduce the number of used batteries.
Read recommendations:
16340 500MAH 3.7V
Lithium phosphate iron battery
Explosion - Proof Lithium Batteries
connector for energy storage battery Product
LR726 battery