CR1625 battery: the essential energy support to improve forklift efficiency

　　In the modern logistics industry, the role of forklifts is becoming more and more important. With their efficient loading and unloading capabilities and convenient operability, forklifts have become an important tool in various situations, especially in warehouses, logistics parks, manufacturers, etc., where their applications have become more and more widespread.

　　In a forklift, the battery is its essential power source. It is precisely because of the importance of batteries that forklift batteries of various brands are attracting more and more attention. Among them, Nuoli forklift batteries are deeply trusted by customers due to their high quality, low loss, strong stability and other advantages.

　　This article will analyze the characteristics, usage and maintenance precautions of Noli forklift batteries to help everyone better understand and use this excellent product.

　　Features of Noli forklift batteries

　　Among the popular forklift battery brands, Noli forklift batteries are undoubtedly favored by customers. Its characteristics mainly include the following aspects:

　　Excellent quality and great value for money

　　Noli forklift batteries use high-quality raw materials at home and abroad, have advanced production lines and production technology, and are relatively reasonably priced. Its long life, low loss and high efficiency also further enhance the product's cost performance.

　　better performance

　　The battery technology used in Noli forklift batteries is very superior, with large capacity and high discharge rate, which better supports the high power output required by the forklift during work, thus allowing the forklift to perform well in driving operations, loading and unloading, etc. is even better.

　　High stability

　　Noli forklift batteries maintain extremely high stability during use because they are equipped with protective measures. Its high-quality, high-performance battery system ensures normal operation in harsh environmental conditions.

　　Safe and reliable

　　Noli forklift batteries have undergone a variety of rigorous tests to ensure that they are of high quality and will not cause safety hazards due to cutting corners or cutting corners.

　　Steps to use CR1625 battery

　　In order to better utilize the performance of CR1625 battery, the following are the basic steps for using this product:

　　Step one: Check battery power

　　First of all, you need to check whether the battery power is sufficient. If the battery power is insufficient, you need to charge it in time.

　　Step 2: Open the battery cap

　　There is a cover on the forklift battery. You need to open it. Use the battery cabinet key to open the battery lock, and then remove the wire link from the connector.

　　Step 3: Install the battery

　　Remove the old battery from the upper and lower balancers and install the new battery with the nameplate facing the user. When installing the battery, be sure to keep it flat and stable to avoid shaking.

　　Step 4: Connect the wires

　　The wires on the connector need to be installed correctly on the battery tank head. Note that the red wire corresponds to the positive pole and the black wire corresponds to the negative pole.

　　Step 5: Open the air pipe

　　Just adjust the air outlet on the side of the battery to keep the water level on the standpipe 2-3cm from the air outlet.

　　Step 6: Put down the battery cap

　　After installing the battery, you need to fasten the battery cover and lock the key.

　　The above six steps are the steps for using Noli forklift batteries. As long as you follow these steps, the service life of the battery can be optimized.

　　Precautions

　　There are some things you need to pay attention to when using Noli forklift batteries to ensure their efficiency and safety:

　　Basic precautions: The outside of the battery needs to be kept clean to avoid the adhesion of corrosive liquids. To avoid causing the battery to overheat, do not place electronic devices near the battery. Before connecting the battery wires, check the battery polarity and pay attention to the connection of the red and black wires. Charging Precautions Do not leave the battery uncharged for a long time. Do not connect the charger to a wire other than the battery. Maintenance Precautions Charge and maintain the battery regularly. Regularly check the battery maintenance recommendations and maintenance records. Clean and preserve batteries regularly. Battery replacement frequency issue

　　The forklift battery needs to be replaced after being used for a certain period of time, and the frequency of battery replacement mainly depends on the usage of the battery. Under normal circumstances, the service life of the battery is 5 years. If it needs to be replaced, you should choose a CR1625 battery that is consistent with the forklift brand.

Read recommendations:

Snow board shoulder strap set

Lithium manganate (LiMn2O4)

Teach you to identify true and false button batteries

802540 battery

CR2477 battery