What are the methods for maintaining 18650 battery 3500mah lithium and what are their advantages?

　　The maintenance method for 18650 battery 3500mah lithium is to clean, regularly clean the battery surface and blow dry it. When transporting, disassembling or installing batteries, 18650 battery 3500mah lithium should pay attention to anti-vibration. In addition, the advantages of 18650 battery 3500mah lithium are extended running time, charging capacity, safer and safer for workers. Better for the environment and so on. Next, I will introduce the details to you.

　　1. Forklift battery maintenance methods

　　1. Cleaning. If dust accumulates on the surface of the battery, the dust will absorb water and cause leakage between the electrodes. When checking the electrolyte level, clean the battery surface regularly with a damp cloth and blow it dry. It should be noted that you do not need to wipe the battery with a dry cloth, dust it off or cover the battery with vinyl film. This will generate static electricity and cause the battery to explode. Do not put your fingers or fingers into the battery connecting plug, and do not touch the battery connecting electrodes, otherwise static electricity and short circuit will occur. Batteries should be cleaned before charging.

　　2. When transporting, disassembling or installing the forklift battery, attention should be paid to anti-vibration, and the forklift battery should be reliably fastened on the vehicle.

　　3. The starting time of the starter should not exceed 5 seconds each time, and the time interval between two uses should not be shorter than 15 seconds. If the starter fails for three consecutive times, a forklift maintenance technician should be found to find out the reason.

　　4. When filling the battery with electrolyte, it should be kept clean and dust should be prevented from entering the inside of the battery. Dust and other unclean substances on the surface of the forklift battery should be wiped off regularly to keep the vent of the filling port open.

　　5. Replenishing distilled water. The daily work is to add distilled water to the specified water level. In the long run, recommended distilled water should be used. Do not mix tap water, it will shorten the service life because it contains many impurities such as chlorine, iron, etc.

　　2. Advantages of 18650 battery 3500mah lithium

　　1. Extended runtime

　　One of the biggest advantages of using batteries in forklifts is that they can extend cycle life and run time. Compared with using traditional lead-acid batteries, the life of 18650 battery 3500mah lithium can be extended by 4 times. There is no voltage drop throughout the lithium discharge cycle, so trucks and lifts are just as fast as when they started. Lead-acid batteries experience a voltage drop and typically lose 20% of their charge during the conversion process. Even worse is putting them in the refrigerator, where they lose 50%. The extended life of lithium batteries can help warehouses maintain seamless operations at all times and increase overall productivity.

　　2. Charging ability

　　Another advantage of lithium batteries is that they also allow for quick and easy charging compared to their lead-acid alternatives. Lithium batteries can be charged from zero to full in less than 2 hours. There's no "memory effect," meaning a dead battery won't slow it down. Lithium batteries are also more efficient than lead-acid batteries. Lead-acid batteries can severely degrade if charged too frequently. However, the battery will remain in good condition no matter how often it is charged.

　　3. No maintenance required

　　One major disadvantage of lead-acid batteries is that they require a lot of maintenance. Daily watering is required and acid spills can occur. Lead-acid batteries typically increase labor costs because batteries require zero maintenance in terms of time and effort required to maintain them during each shift. Therefore, using lithium batteries can reduce costs and save warehouse time.

　　4. Safer for workers

　　While there are many safety hazards in a warehouse environment, forklifts are one of the bigger threats. This is especially true for trucks that use lead-acid batteries. Removing a heavy battery from the truck and replacing it with a freshly charged battery every shift increases the risk of injury. Acid spills from lead-acid batteries can be hazardous in your workplace. 18650 battery 3500mah lithium are equipped with automatic protection devices that provide an extra pool. There is no need to replace the battery in the truck and there is no risk of acid spills.

　　5. No battery room required

　　Another advantage of using lithium batteries is that you will no longer need a dedicated battery room in your warehouse. Lead-acid batteries require the installation of a battery compartment where they can be stored and charged when not in use. When charging, these batteries release dangerous hydrogen/sulfuric acid gases and need to be well ventilated and kept cool, which significantly increases running costs. On the other hand, when using lithium batteries, only one battery is needed per truck. Since there are no inflation issues and opportunity charging can be done almost anywhere, the wind-conditioned battery compartment is air-conditioned. You no longer need to worry about storing spare batteries or charging batteries in a room.

　　6. Better for the environment

　　If you want to make your warehouse more environmentally friendly, choosing to use lithium batteries in forklifts is a good choice. Batteries have several improvements over lead-acid batteries. They are less likely to cause damage to your warehouse, your workers, and the environment. One of the original lead-acid batteries saves 30% energy. By using lithium batteries, you can reduce energy consumption in the workplace. This helps protect the environment and will also reduce costs and carbon footprint. If your company has an internal mandate to reduce its carbon footprint, switching to lithium batteries is a great way to help. Acid spills can also cause environmental hazards when handling lead-acid batteries.

　　7. Save money

　　Replacing lead-acid batteries with new energy batteries for forklifts can also help companies save money. While they will cost more upfront, the benefits are worth it and will save your business money over time. When using batteries, energy consumption will be lower. As we mentioned earlier, lithium batteries have no routine maintenance.

Read recommendations:

R6P

Voltage and capacity of lithium iron phosphate battery

Types and Characteristics of Lithium Polymer Batteries

3.2v 20ah lifepo4 battery

1.2V NiMH battery