yyw_articles

Home > 
  • yyw_articles
  • 3V Button battery

    Time:2024.12.04Browse:0

    Share:

      What are the characteristics of 3V Button battery and how to maintain them?

      3V Button battery have high energy and power, long service life, are safe and reliable, have a wide working range, can be recycled, etc. In addition, we should pay attention to the fact that the power battery should avoid exposure to the sun to avoid aging, which will reduce the battery life. Reasonable charging time should be arranged, and the lithium battery should not be exposed to water, etc. Next, I will introduce the detailed content to you.

      1. Characteristics of 3V Button battery

      1. High energy and high power.

      2. High energy density.

      3. Cyclic use under high rate partial state of charge (HRPSOC).

      4. Wide operating temperature range (-30~65℃).

      5. Long service life, requiring 5-10 years.

      6. Safe and reliable.

      2. How to maintain 3V Button battery

      1. Avoid exposure to the sun

      It is best to avoid exposure to the sun without shelter. In a high-temperature environment, the internal pressure of the power battery will increase due to the influence of temperature, which will force the battery's pressure-limiting valve to open, causing the battery to lose water and causing the battery to malfunction. The activity decreases, accelerating the aging of the plates and reducing the battery life.

      2. Master the charging time

      Overcharging will shorten the battery life. Therefore, during the charging process, a reasonable charging time should be arranged according to the actual situation of the vehicle and the usual frequency of use and mileage. Try to charge before the battery indicator light comes on to avoid over-discharge and damage to the battery.

      3. Do not let water enter the power battery pack

      The waterproof and sealing properties of cars are very good, but when cleaning electric cars, it is best not to direct the high-pressure water gun at the power battery to clean, otherwise it is likely that water will enter and short-circuit due to loose sealing of individual components. Including when it rains, do not leave the vehicle in the open air or low-lying areas. If the power battery pack gets water, it needs to be sent for repair in time. Therefore, during the cleaning process of electric vehicles, pay attention to the pressure of the cleaning parts and the high-pressure water gun.

      4. Do not store in a power-depleting state.

      The battery cannot be in a depleted state when stored, that is, the electric vehicle is stored without charging the battery in time after use. Batteries stored in this electrical state are very prone to sulfation, and the lead sulfate crystals will adhere to the plates, blocking the ion channels, reducing battery capacity, and causing insufficient charging. Therefore, it should be fully charged before storage, and it is best to recharge it once a month to better maintain the health of the battery.


    Read recommendations:

    521133 160MAH 3.7V

    Polymer lithium battery expansion

    2200mah 18650 battery.University and Toyota Research Institute develop AI algorithm to predict batte

    18650 1800mah battery

    802540 lipo battery

    R6 Carbon battery

    Return to List

    3v Button battery

    Relevant News