How should button cell battery cr1620 be charged?

　　With the implementation of the new national standards for electric vehicles, lithium batteries will be used more and more. If you want button cell battery cr1620 to last longer, battery charging is the first condition. So how should button cell battery cr1620 be charged?

　　1. Charging new batteries

　　Generally speaking, the life of a lithium battery begins from the moment it is shipped from the original factory, which is the life of a low-capacity lithium-ion battery. The rechargeable battery is left in a dormant state for a period of time. When the volume is smaller than the standard value, the use time is reduced. This volumetric damage over the lifetime of a lithium-ion battery is reversible, in other words, repaired by charging the battery. All in all, this whole process, for example, when the body is not working, is in the form of calories, but there is also a small amount of tissue cells working to ensure that the body functions normally.

　　When it comes to charging a lithium battery for the first time, there is a misinformation that when the lithium battery is activated, the battery must have more than 12 hours of battery charging time and must be charged three times before it is released. In fact, overcharging, overcharging and discharging will cause varying degrees of harm to lithium. This requirement also applies to traditional nickel batteries.

　　button cell battery cr1620 are easy to activate and do not require special methods. Generally, after 3-5 normal battery charging cycles, the system can be used to recharge the battery and restore capacity.

　　2. When to charge lithium batteries?

　　When do you charge lithium batteries? Some people will respond without hesitation: an electric car needs a battery charge when it runs out of juice. In fact, there is no mistake, because the charging frequency of button cell battery cr1620 is relatively limited, so button cell battery cr1620 should be used to charge batteries as much as possible.

　　Under all normal circumstances, the battery capacity should be used to charge the battery, but measures should be taken according to the specific needs of the life. For example, tonight's battery car does not have enough power to support tomorrow's plan, and there is no battery charging standard the next day. At this time, it should be charged immediately.

　　In fact, keeping rechargeable batteries clean is not an extreme method but to drain the remaining batteries. If the battery car currently uses a too low warning and still does not charge the battery until it cannot drive, this situation will cause excessive charging and discharging of the battery, which will cause too low working voltage and cause damage to the battery cycle time.

　　3. Charging of lithium battery

　　The activation of electric vehicle lithium batteries does not require special methods to charge according to standard times and procedures, even the first three times of charging. In all normal electric vehicle applications, lithium ions will of course be excited; when the electric vehicle usage prompts that the battery is too low, charging should begin immediately.

Read recommendations:

505060 2000mAh 7.4V

The life of lithium iron phosphate batteries in normal temperature environment.home energy storage l

Ni-MH battery pack

3.7v 18650 battery pack

Nickel Hydride No. 5