Time:2024.12.04Browse:0
What aspects should be remembered for daily maintenance of 402030 battery?
After the implementation of national standards, 402030 battery, as a new type of energy storage battery, gradually replaced traditional lead-acid batteries. Compared with lead-acid batteries, lithium batteries have the advantages of high kinetic energy, small size, light weight, environmental protection, and no memory. With the popularity of lithium-ion battery packs, lithium-ion batteries have reached the hearts of thousands of customers every day. What aspects should be kept in mind during routine maintenance of 402030 battery? Chargers must match.
The charging head should be fully matched with the lithium battery pack, so it is impossible to use the lead-acid battery charging head immediately. The current from the charging head passes through the lithium battery maintenance system, causing a short circuit failure, thereby causing a safety accident of the lithium battery pack. The working voltage of the charging head is too low, which makes the battery charging efficiency low and takes too much time.
Know the proper charging method. The charging head is first connected to the lithium battery pack, and then the power plug of the charging head is connected to the 380V AC power supply. The charging head displays a bright red light when the power is connected. Remember to charge shallowly and discharge shallowly. The basic principle that needs to be followed in lithium-ion batteries is shallow charging and shallow discharge, that is, charging in a timely manner and not waiting until the battery is almost empty before recharging to ensure that the battery voltage is maintained in a stable state. Deep charging and discharging (more than 90% of the volume) can easily damage rechargeable batteries. If the lithium battery is not in use, the lithium battery should be turned off immediately, otherwise the lithium battery should be removed and released from the rechargeable battery seat. Because the motor and control board will still consume switching power when fully loaded. Especially in long-term parking lots, it is best to conduct similar hot battery charging every month to prevent battery passivation treatment from occurring, damaging the structure of the battery and thus damaging the number of battery cycles. Prevent metal contact points from coming into contact with metal blocks, and prevent metal blocks from coming into contact with the positive and negative electrodes of the battery, which may cause short circuit failure and harm the rechargeable battery. Do not knock, pin, climb, replace, or blow the solar rechargeable battery to avoid risks.
Read recommendations:
501825 180mAh 3.7V
Component of power lithium batteries
Advantages and disadvantages of lithium battery
energy storage system lithium battery direct sales
1.5v Alkaline battery