Charging characteristics of r6 battery

　　The entire process of rechargeable batteries is a complex electrochemical conversion process, and its diversity is as follows;

　　(1) Various factors such as electrode plates, electrolyte concentration, polar substance conditions, and battery charging operating temperature have direct harm to the large current that the battery can withstand.

　　(2) During the entire process of battery charging, the discrete system can not only use a simple constant current power supply or constant current source battery charging method, but also there will be changes in the discrete system during the entire process of battery charging, and its current changes with the battery charging time. Exponential decline.

　　(3) After the battery is charged several times, even for the same type of battery, the battery charging capacity will be very different, and the battery capacity may also be different.

　　A reasonable constant current source battery charging method is proposed. When the battery is low, the battery charging method first adopts the constant current charging method. For example, the short circuit capacity of the 2000mah battery charging, the 2 current battery charging, the battery voltage can be increased to the preset value () in about 40 minutes, and then the constant current charging method is used. When charging the battery, the operating voltage can be maintained and the current can be quickly reduced. During constant current source battery charging, the operating voltage accuracy is highly regulated and must be maintained within the 42mv range, that is, the deviation cannot exceed 1%. During this period, the current will also gradually decrease to a certain level, and the battery will be recharged with a small current, eventually reaching the rated current of the battery capacity. The entire process can fill about 80 minutes. If you use a 1a current battery to charge, the voltage of the battery will rise to about 100 minutes, and it will be fully charged in about an hour. The current selection is different, but can be filled, which is a time-consuming problem.

　　The constant current to constant voltage charging method can make the battery reach a full charge state, which can fully charge the rechargeable battery without damaging the rechargeable battery.

Read recommendations:

18650 2500mAh 3.7V

How to control the customized charging and discharging process of 18650 lithium batteries?3.7v 18650

LR721 battery.Which aspect is more important for selecting lithium battery manufacturers?

lifepo4 200ah battery pack 12v

2025 button cell battery