How to use the lithium battery comprehensive tester?

First of all, a simple description, the use of lithium battery comprehensive tester, is to test the performance of lithium battery, including test voltage, internal resistance, capacity, internal pressure, self-discharge rate, cycle life, sealing performance, safety performance, storage and other performance, other overcharge, overdischarge function test and so on.

So powerful, so, how to use the lithium battery integrated tester?Below Shenzhen Xinda energy electronics Co., Ltd. will introduce to you!

1. Power supply switch: tester power supply switch;

2. Emergency stop switch: cut off the discharge circuit and charging circuit of the battery in an emergency;

3. Press the button about 1S, the screen automatically lit, the computer off short press;

4. Under the home page of the lithium battery integrated tester test software, select the lower computer to trigger, and press this button to trigger the automatic test of the system.Under the normal operation state of the computer, the sudden power failure or forced shutdown may cause damaged computer files. It is recommended to cut off the power supply when the computer is turned off.If the software cannot be started normally, the original program can be deleted and the backup program files can be pressed to continue to use.

Cping method:

1.P +: Battery positive electrode terminal column;

2.P-: Battery negative terminal column;

3.C +: Different port charging positive electrode terminal;

4.C-: Special port charging negative terminal terminal.

Charging and discharging are all the same terminal, generally speaking, the battery only has a positive electrode and a negative electrode.Charging and discharge are not in the same port, there are three kinds of different port battery, positive electrode different port, negative electrode different port, positive and negative electrode are different port.

1. Positive port: negative is the same port, the positive charging is not the same port as the positive discharging;

2. Negative port: the positive electrode is the same port, the negative charging is not the same negative port as the negative discharge;

3. Positive and negative electrode different port: the battery has two sets of positive and negative electrode lines, and the charge and discharge ports are not shared.

Lithium battery integrated tester is one of the lithium battery assembly equipment, one of the equipment, lithium battery comprehensive tester this link is the last step, is the whole lithium battery set welding, can use, unsafe, is to use comprehensive tester to test, are qualified, equivalent to the lithium battery is finished product, can take to sell.

There is also a point to remind is that the whole battery pack is installed with the protection plate, to use the lithium battery comprehensive tester, because the protection plate is two lines a positive and a negative, the comprehensive tester has two clamps, clamp for detection.