What are the balanced charging methods for series connected UPS power supply 402030 polymer battery?

　　●Attach a parallel balancing circuit to each single cell of the battery pack to achieve a shunt function. In this mode, when a certain battery is fully charged first, the balancing device can prevent it from overcharging, and at the same time, the excess energy is converted into heat energy to continue charging the battery that is not fully charged.

　　●Pass each cell one by one before charging, discharge the same load to the same level, and then perform constant current charging to ensure a more accurate balanced state between each cell. However, due to the physical differences between individual UPS power 402030 polymer battery, it is difficult for each cell to achieve a consistent effect after deep discharge. Even if the same effect is achieved after discharge, new imbalances will appear during the charging process.

　　●Timing, sequencing, and individual testing of individual batteries in the battery pack and even charging. When charging the battery pack, it can be ensured that each battery in the battery pack will not be overcharged or overdischarged, thus ensuring that each battery in the battery pack is in normal working condition.

　　●Using the time-sharing principle, through the control and switching of switch components, extra current flows into the battery with a relatively low voltage to achieve the purpose of balanced charging. This method is more efficient, but the control is more complicated.

　　●Take the voltage parameters of each battery as the balancing object to restore the voltage of each battery to be consistent. During equalization charging, the capacitor is alternately connected to two adjacent batteries through a control switch, receives charge from the high-voltage battery, and then discharges to the low-voltage battery until the voltages of the two batteries become consistent. This balancing method can better solve the problem of battery pack voltage imbalance, but this method is mainly used in situations where the number of batteries is small.

Read recommendations:

Rack-mounted energy storage battery GN-192V 100Ah

Paper lithium battery research progress.batteries aaa

Analysis of technical difficulties in concentrated photovoltaic power generation system

AAA Ni-MH batteries price

9V carbon battery