Time:2024.04.07Browse:69
Battery leakage, it is very likely that because of the sealing between the upper cover and the bottom groove appears aging, and even appear cracking situation.At this time, it is necessary to check the appearance of the battery first, check whether there is cracking, if any, you have to use plastic welding to repair, after testing the concentration of the electrolyte, so as to ensure the normal work of the battery.
Battery leakage, it is very likely that because of the sealing between the upper cover and the bottom groove appears aging, and even appear cracking situation.At this time, it is necessary to check the appearance of the battery first, check whether there is cracking, if any, you have to use plastic welding to repair, after testing the concentration of the electrolyte, so as to ensure the normal work of the battery.
Of course, it may also be because of leakage at the safety valve or wiring.First remove the battery panel, and then check whether the safety valve has any leakage mark, if there is a need to repair the corresponding parts or direct replacement.
Car batteries also have a service life at all.If the electrolyte leakage is more (in a short time), and the above treatment method can not be solved, the new electrolyte must be replaced in time.Otherwise, the flowing electrolyte (containing strong acid) will corrode the body or parts around the battery, and the maintenance cost will not only be so easy to replace the battery.