yyw_articles

Home > 
  • yyw_articles
  • The model identification in the identification of lithium-ion batteries

    Time:2024.12.06Browse:0

    Share:

      The model identification in the identification of lithium-ion batteries

      According to the IEC61960 standard, the identification of lithium-ion batteries is as follows:

      01) Battery identification composition: 3 letters followed by 5 numbers (cylindrical) or 6 numbers (square).

      02) The first letter represents the negative electrode material of the battery. I - represents lithium-ion with built-in battery; L - represents lithium metal electrode or lithium alloy electrode.

      03) The second letter represents the positive electrode material of the battery. C - Cobalt based electrode; N - Nickel based electrode; M - manganese based electrode; V - Vanadium based electrode.

      04) The third letter represents the shape of the battery. R - represents cylindrical battery; L - represents a square battery.

      05) Numbers

      Cylindrical battery: 5 numbers represent the diameter and height of the battery, respectively. The unit of diameter is millimeters, and the unit of height is one tenth of a millimeter. When the diameter or height of any dimension is greater than or equal to 100mm, a diagonal line should be added between the two dimensions.

      Square battery: Six numbers represent the thickness, width, and height of the battery, in millimeters. When any of the three dimensions is greater than or equal to 100mm, a diagonal line should be added between the dimensions; If any of the three dimensions is less than 1mm, add the letter "t" before this dimension, and the unit of this dimension is one tenth of a millimeter.

      For example:

      ICR18650 represents a cylindrical secondary lithium-ion battery with a positive electrode material of cobalt, with a diameter of approximately 18mm and a height of approximately 65mm.

      ICP103450 represents a square secondary lithium-ion battery, with cobalt as the positive electrode material. Its thickness is about 10mm, width is about 34mm, and height is about 50mm.

      ICP08/34/150 represents a square secondary lithium-ion battery, with cobalt as the positive electrode material. Its thickness is about 8mm, width is about 34mm, and height is about 150mm.

      ICPt73448 represents a square secondary lithium-ion battery, with a positive electrode material of cobalt, a thickness of approximately 0.7mm, a width of approximately 34mm, and a height of approximately 48mm.


    Read recommendations:

    602030 300mAh 3.7V

    The production process of lithium battery.18650 li ion rechargeable battery Manufacturing

    The Challenge of Rechargeable Batteries

    601435 battery Manufacturing

    CR1616 battery

    What is the difference between 18650 lithium batteries with and without battery protection plates

    Return to List

    Production Industry Evaluation of New Energy Vehicle Power Batteries

    Relevant News