Learn how to step up and step down lithium batteries

Lithium battery step-up and step-down:

Lithium-ion batteries have a certain range of cell voltage. For example, the normal operating voltage range of lithium iron phosphate batteries is 2.5V-3.65V, and the normal operating voltage range of lithium manganese oxide and ternary batteries is 3V-4.2V. In the application of lithium-ion batteries, when the total voltage is 60V and below, a battery protection board is required. Above 60V, a battery management system (BMS) is required. The role of these two devices is to protect the battery from working properly. After the number of strings of the battery pack is determined, the voltage of the battery pack cannot be adjusted arbitrarily. That is, the voltage change of the battery pack can only change within the normal working voltage range: when charging, it rises from the lower voltage limit to the upper voltage limit. When electricity is used, it drops from the upper limit of the voltage to the lower limit of the voltage. Understand this problem, if you want to make the lithium battery have a large range of voltage rise and fall, you can adjust it at will. The best solution: make a set of battery packs, equip a suitable inverter, and equip a DC voltage regulator to meet the voltage step-up and step-down requirements of lithium batteries. This method is rarely used in practical applications, unless the AC power used is often out of power, or when solar or wind energy is used to charge the battery pack, this method of step-up and step-down will be considered.

Lithium battery buck-boost experiment:

First, let the lithium battery drop to 3.3V through the step-down chip, then power the microcontroller and the Bluetooth module, and plan to raise it to 7V to carry a load.

Result: The Bluetooth module does not work and cannot be searched. Remove the Bluetooth, the MCU and the load work normally. When the single-chip microcomputer is removed, the Bluetooth and the load work normally. When a single set of power supply is not used, all three work normally.

Description: xc6206 for step-down and fd6291 for step-up.

The above method of step-up and step-down of the lithium battery can be used in the experiment, and the effect is good for research and learning.

Mottcell Battery mainly focuses on the production, R&D and manufacturing of lithium iron phosphate batteries. The main products are lithium-ion batteries, lithium iron phosphate batteries, 14500 lifepo4 battery, 18650 lifepo4 batteries, 12v lifepo4 batteries, 24v lifepo4 batteries, 36V lifepo4 Battery, 48v lifepo4 batteries, energy storage lithium batteries, including photovoltaic lithium batteries, UPS lifepo4 batteries, telecom backup power lifepo4 batteries,Golfcart Lifepo4 Battery etc.Mottcell serves many well-known brands in the industry.