The Product Review Office of the Equipment Center of the Ministry of Industry and Information Technology summarized the recent monthly "Announcement" product technical summary exchange meetings, and summarized the models that did not pass the review and recent work and problems existing in the review.

　　The Product Review Office of the Equipment Center of the Ministry of Industry and Information Technology has summarized the recent "Announcement" product technical summary exchange meeting held on a monthly basis. It has uniformly summarized the models that failed to pass the review and the recent work and problems existing in the review. Related situations The notification is as follows:

　　1. Regarding the rectification work of GB7258-2017

　　Enterprises should complete the rectification work on the implementation requirements for new production vehicles in GB7258-2017 starting from January 1, 2019 before December 31, 2018. That is, as of the "Announcement" in December 2018, relevant products should apply for changes and extensions to comply with the required announcement parameters and filing parameters, and complete the inspection reports corresponding to the "Compulsory Project B for Safe Operation of Motor Vehicles".

　　2. Regarding the implementation of GB 20300-2018

　　GB 20300-2018 "Technical Safety Conditions for Vehicles Transporting Explosives and Highly Toxic Chemicals on Roads" has been implemented since July 1, 2018. Newly produced vehicles must comply with the requirements of GB 20300-2018 starting from January 1, 2019. Relevant enterprises are requested to arrange rectification work in accordance with the standard requirements as soon as possible.

　　3. Garbage transfer semi-trailers (ordinary box structure) must meet the following requirements:

　　1) The product name should not contain the word "self-discharge";

　　2) The entire vehicle should meet the requirements for a van semi-trailer: other columns indicate that the top is closed and cannot be opened; a top-view photo is required for filing; the height of the O4 compartment is not less than 1.8 m; there must be no lifting or side unloading functions.

　　3) The special device should be reasonable. For example, the garbage and the oil cylinder of the special device should be separated, with access holes left, or the oil cylinder should be located outside the vehicle, etc.

　　4. If the anti-riot vehicle has side-facing seats, the restricted use unit should be indicated in other columns.

　　5. Non-plug-in hybrid electric vehicles should provide inspection reports on relevant new energy projects with reference to new energy vehicles.

　　6. Pure electric buses equipped with fuel heating devices should fill in the filing parameters of the heating device as required and conduct relevant inspections.

　　7. Recently, our office has standardized the product acceptance work. When accepting applications, they will be processed at three levels, and a formal review will be conducted on the completeness and standardization of the enterprise's application materials. For products that are not accepted, the reviewers should unanimously inform the applicant all at once. Enterprises are requested to arrange the progress of the declaration work.

　　8. Recently, companies have applied for a large number of rectified models. When making changes and expansions, some companies have declared content that clearly violates the requirements of standards and regulations. In this regard, we require review experts to strictly review disciplines, unify standards, and establish a reporting mechanism for illegal models. Businesses with repeated violations are flagged in the integrity system. At the same time, we also ask enterprises to supervise our work and promptly report any irregularities in declarations to our office, so as to jointly maintain an open, fair and impartial review environment.

　　Product Review Office Fax: 010-68200270

Read recommendations:

501825 180mAh 3.7V

Confused battery types

Air battery

601435 battery Processing

3.7v 18650 battery pack