As we all know, graphene floor heating, as a new generation of floor heating products, has already become famous in the heating market and is recognized by more and more industry experts and ordinary people. Because the market is large enough, coupled with the superior performance of graphene floor heating, many graphene floor heating brands have emerged in a short period of time, and the development speed is gratifying. However, analyzing the current situation of the entire graphene electric heating industry, we will find that the core difference of graphene floor heating lies in the heating technology - that is, graphene heating chip, which is the key technology and technical barrier for all graphene floor heating products. Only with mature graphene heating technology and chip packaging lamination and cutting technology can we ensure the reliability, safety and high energy efficiency of graphene heating chips. For example, the high-temperature melting film laminating technology used in the ENNIU graphene series heating products is to cover the graphene heating material on the heating film using the melting and pasting method at a high temperature of 800°C to make graphene heating film products. This system separates water and electricity, making it safe and efficient. The most representative of these is the graphene far-infrared black gold film product, which can be called the black technology product of the graphene floor heating brand. The graphene far-infrared black gold film uses ultra-thin polyurethane plate hot pressing as the base material. It is corrosion-resistant and has high compressive strength. It uses a modular design and a multi-layer protective structure. It can be used with the floor to lay a complete floor heating system, which does not occupy the height of the floor. , the heating module is composed of a five-layer structure from bottom to top: insulation board, flame retardant reinforced board, infrared reflective film, graphene heating chip, and chip protection board. During installation, you only need to pave the heating module as a whole, and it is waterproof Insulated butt plugs, heating sheets are connected in parallel and then connected to the thermostat. The installation is quick. After the graphene far-infrared black gold film is paved, the customer can pave the cement mortar layer and facing layer by themselves. 1. Thermal insulation board is used for thermal insulation to prevent heat loss from the floor. It avoids heat consumption structurally and is energy-saving and environmentally friendly. The ENNIU graphene floor heating brand uses 2.5cm thick high-density thermal insulation extruded board with excellent thermal insulation performance. Better, and has strong structural hardness; 2. The flame-retardant reinforced board is based on safety considerations. It is difficult for the current insulation boards on the market to meet the absolutely safe fire-proof and flame-retardant requirements. Therefore, the graphene floor heating brand adds graphene to the insulation board. A layer of 0.6cm high-density flame-retardant board can not only improve the safety factor of the overall structure, but also increase the strength of the structure, which can effectively improve the low-density foam-soft structure of the insulation board; 3. The graphene heating chip mainly uses far-infrared For heating in the form of radiation, the infrared reflective film is used to emit far-infrared light waves generated by the heating chip, indirectly improving thermal efficiency, saving energy and environmental protection. Far infrared can promote human microcirculation and has very good health effects. The graphene floor heating has been tested by the National Far Infrared Testing Center and the normal emissivity is as high as 0.89 (the national standard is 0.83). It can be said to be a very good product. A good far-infrared healthy heating product; 4. The chip protection layer uses high-strength, high-thermal conductivity reinforced panels, which are mainly used in complex construction sites to protect chips from damage, and can adapt to cross construction at the installation site. The Enniu graphene floor heating brand believes that the installation of floor heating is a systematic engineering project that is closely related to consumers' lives. Regardless of product quality, installation and construction, or after-sales and maintenance, a higher standard is required. As an electric floor heating company, it must maintain its corporate The basic principle is to consider customers in all aspects of product development, production, installation and after-sales; only when customers use it well can the industry develop better.

Read recommendations:

LR20

AG10 battery.18650 lithium ion battery welding method

Low temperature military lithium battery

401030 battery Vendor

18650 lithium battery