Processing process of 18650 lithium battery cell 18650 lithium battery is a commonly used lithium battery in electronic products and is often used as a battery cell in laptop batteries. The meaning of the model is as follows: For example, type 18650 means that the diameter of the battery is 18mm and the length is

　　Processing process of 18650 lithium battery cell

　　Type 18650 lithium battery is a commonly used lithium-ion battery in electronic products and is often used as a battery core in laptop batteries. The meaning of the model is as follows: For example, type 18650 refers to a cylindrical battery with a diameter of 18mm and a length of 65mm.

　　Processing process of 18650 lithium battery cell one: coating

　　First, let’s start with the coating process. In this process, you can see large rolls of copper foil (yellow) and aluminum foil (silver). Aluminum foil is used to coat nickel cobalt manganese NCM ternary material; conversely, copper foil is used to coat negative active material graphite; the white one is the separator. Global lithium-ion battery separators are mainly occupied by Asahi, Celgard, SK, Toray, W-SCOP and other manufacturers. These foreign companies control nearly 70% of the market share. Our country's separator companies account for about 30% of the market share, and the independent localization of lithium-ion battery separators is making breakthroughs. The capacity of the battery core is obtained based on the proportional area of these formulas.

　　Low temperature lithium iron phosphate battery 3.2V 20A -20℃ charging, -40℃ 3C discharge capacity ≥70%

　　Charging temperature: -20~45℃ -Discharge temperature: -40~+55℃ -40℃ Support maximum discharge rate: 3C -40℃ 3C discharge capacity retention rate ≥70%

　　Click for details

　　Processing process of 8650 lithium battery cell 2: Assembly

　　The sorted positive and negative electrodes will be fully automatically rolled and packed here. The white material is the separator. The 18650 lithium battery cell cannot work properly like this. Electrolyte must be added as a medium to allow a chemical reaction between the positive and negative electrodes, so that lithium ions can migrate between the positive and negative electrodes, and the lithium-ion battery can be charged and discharged only when the charge ions output energy. After the automatic roll is wrapped, it rolls directly onto the assembly line and enters the next assembly step to install the steel shell.

　　The steel shell is stamped in one piece and has a thickness of less than 1mm. Therefore, the strength and quality of the steel are very high. This 18650 lithium battery cell factory uses imported Korean steel materials.

　　18650 lithium battery processing process three: first charging and testing

　　After the 18650 lithium battery is injected with electrolyte, it has not actually been charged, and the state of the positive and negative electrode surfaces has not reached stability at this time. It must be charged for the first time before it can be used normally. This first charge is called formation. When charging for the first time, extra electricity is charged to form a protective film on the surface of the electrode. This protective film is the secret of the low self-discharge of lithium-ion batteries. At the same time, the nature of the protective film also affects the performance and life of the battery. Therefore, the chemical formation process is very important. The formation is completed using volume dividing cabinets.

　　Low temperature and high energy density 18650 3350mAh-40℃ 0.5C discharge capacity ≥60%

　　Charging temperature: 0~45℃ Discharge temperature: -40~+55℃ Specific energy: 240Wh/kg -40℃ Discharge capacity retention rate: 0.5C Discharge capacity ≥ 60%

Read recommendations:

Lithium Battery LQ12-06

Production requirements for lithium batteries.18650 lithium battery 3000mah

What are the technical requirements for lithium iron phosphate battery packs?Nickel Hydride No. 5 ba

12v lithium ion battery pack 100ah

aa battery