In the electrochemical response of the power battery, the stable powder of the battery is a very important figure. As a result, the electrical vendors are listed as secrets and production processes as secrets, and the conditions are also listed as an important secret for the production of the company's battery production. During the period of batteryization In the early stage of the battery discharge capacity, after the battery electrochemical status was stable, the battery capacity became stable. As a result, some transformed programs also include repeatedly charging and discharging loops to reach the intention of stabilizing batteries. This requires the battery detection equipment to provide multiple step settings and cycle settings. Taking the BS9088 device as an example, the device can set 64 step parameters, and many 256 cycles can be set. Do small current filling circulation, and then make a large current charging and discharge cycle. On the contrary, it can also be optimized to be optimized from conditions to save costs. 1.0-0.3V is basically the SE35 % stage.

　　Regarding turning into face sounds, the composition of S composition 30 from the polymer power batteryization into the process of stabbing curve in the process, and it can also see that the termination voltage of the translet can be seen. The main processes composed of 15S are mainly daily 2 and CO2, etc., and the voltage of the voltage is 2.5V resistance. The scale, because the EC restores and decompositions, the qi 0.0 body is mainly C2: When the voltage is greater than 3.0V, the decomposition of DMC and EMC in 510152025 electrolytes. In addition Gas also opened 1323 Shiqiang's initial charge and discharge process (the letter rate was presented by C30; after the voltage was higher than 3.8V, the restore and decomposition of DMC and EMC became the main response. The amount of gas has a large amount of gas, and the voltage is greater than 3.5V. Because the SE layer of the negative appearance of the battery has been fundamentally composed. On the one hand, it can greatly reduce the time and improve the power of production; on the other hand Test the capacity of the battery.

Read recommendations:

401030 90mAh 3.7V

How much battery power is left in the lithium-ion battery for mobile phone energy storage? Is the ch

6000mah 3.2v lifepo4 battery.What are the purchasing tips for mobile power charging banks

2000mah 18650 battery

NiMH No. 7