How to charge 23A battery and lead-acid batteries correctly

Lithium-ion battery manufacturers talk about how to charge 23A battery and lead-acid batteries correctly? Many people don't know much about the charging and discharging of 23A battery and lead-acid batteries. High current discharge, inability to charge in time, deep discharge, frequent charging, short charging time, and the charger itself will affect the long life of the battery. How to maintain the battery? Lithium-ion battery manufacturers will talk to you about the correct charging methods for 23A battery and lead-acid batteries.

How to charge 23A battery correctly

Due to the very active chemical properties of lithium metal, the processing, storage, and use of lithium metal have very high environmental requirements. With the development of science and technology, 23A battery have now become mainstream.

23A battery can generally be charged and discharged 300-500 times. It is best to partially discharge 23A battery rather than fully discharge them, and try to avoid frequent full discharges. Once the battery is pulled off the production line, the clock starts to move. Whether you use it or not, the service life of 23A battery is only in the first few years.

Whether 23A battery are used or not, the "shelf life" is 3 years, and they decay quickly after three years. Another thing is that it decays very quickly after about 400-500 times. It depends on whether you use it for 3 years or charge it first. The life of 23A battery is "500 times", which does not refer to the number of times it is charged, but a charge and discharge cycle.

In addition to being afraid of low power, 23A battery are also afraid of overheating, especially when charging. If your condom has poor heat dissipation and heats up when charging, it is best to take off the condom when charging.

How to maintain 23A battery

You can charge the purchased 23A battery first. Generally, the lithium-ion battery can be activated in a few hours and then used. When the remaining power of the lithium-ion battery is insufficient, the lithium-ion battery should be charged in time, and should not be charged until the power is completely used up. Generally, the system will prompt "low power" and it is necessary to charge it quickly.

If the lithium-ion battery is not used for a long time, it should be stored in a dry and cool place. Do not store it in a humid environment, which can easily damage the lithium-ion battery. The charging temperature of 23A battery is relatively high at around 25 degrees Celsius, and the temperature should not exceed 45 degrees Celsius. When using 23A battery, the most suitable temperature is minus 20 degrees Celsius to 6 degrees Celsius.

When not in use for a long time, 23A battery should be taken out and placed in a cool and dry place. Do not freeze them to prevent moisture erosion. Prevent them from being used in a high-temperature car. If stored for a long time, charge the battery to 40% before placing it.

It takes a long time for the battery to be delivered from the battery factory to the user, sometimes as short as 1 month or as long as half a year. At this time, because the battery electrode material will be passivated, the manufacturer recommends that the first-time battery should be fully charged and discharged 3-5 times to eliminate the passivation of the electrode material and reach the maximum capacity.

How to charge lead-acid batteries correctly?

The initial charging of lead-acid batteries is generally carried out in two steps: first, charge with the initial current until the electrolyte releases bubbles and the battery single cell voltage rises to 2.3-2.4V. Then continue to charge with a current of 1/2 of the initial current until the electrolyte releases violent bubbles, and the voltage should remain stable for 3H. The total charging time is about 45-65 hours.

It should be fully charged during the first charge, but full charge does not mean overcharging. Under normal circumstances, the charging time is about 5-6 hours, and the battery can be fully charged. The charging time during the day is easier to control, and the subsequent charging time can be slightly increased.

When using lead-acid batteries, you should develop the habit of charging on the same day of use. Do not wait until the power is used up before charging, so as not to shorten the battery life due to "deep discharge". If the fully charged battery is not used for a long time, it should be charged once a month. Do not charge the battery upside down.

Lead-acid battery maintenance method

Lead-acid batteries should be checked regularly after being used for a period of time, such as observing whether their appearance is abnormal, measuring whether the voltage of each battery is average, etc. If there is no power outage for a long time, the battery will always be in a charging state, which will make the battery activity worse. Therefore, even if there is no power outage, the UPS should also perform discharge tests regularly to keep the battery active.

The charging process of a new battery generally takes 6-8 hours. After it is fully charged, the charger will light up green. If the charging time is too long, check whether the charger voltage protection device is damaged. If it is damaged, replace the charger in time, otherwise it is very easy to damage the battery. In addition, do not buy a fast charger, as fast charging is also harmful to the battery plates.

The battery will generate heat during charging and high-current discharge, and water will evaporate when there is heat. Although the process of water evaporation is very slow, the accumulated amount of water evaporation over time cannot be underestimated. Therefore, the battery should be refilled with water once every 6 months or so, so that the service life of the battery will be extended.

The service life of 23A battery is longer than that of lead-acid batteries. Batteries are consumables with a certain lifespan. Therefore, mastering the correct use of lithium-ion battery packs is the secret to "extending the life" of batteries. Develop a good habit, treat your battery well, maintain and care for it regularly, and use it correctly.

Read recommendations:

Adhesive hook and loop straps

Features of battery management system (BMS)portable energy storage battery power supply direct sales

Knowledge of Forklifts and Forklift Batteries

402030 battery manufacture

18650 lithium-ion battery