402030 polymer battery

Time:2024.12.04Browse:0

Share:

  Precautions for Charging Harvester Batteries

  1. When charging, there should be no flames around the battery and smoking is prohibited.

  2. When charging one or several batteries in parallel, it is recommended that the working voltage of the charger does not exceed 16V.

  3. Connect the positive wire of the charger to the positive pole of the battery and the negative wire to the negative pole of the battery.

  4. When turning on the charger, first install it to a low current, then gradually increase the current until the battery gradually accepts the current. If it is a deeply discharged battery or a battery at * * temperature, this process may take a few minutes.

  5. If organic waste gas is discharged from the battery exhaust port or the ambient temperature of the battery exceeds 52 ℃, charging should be stopped immediately. This situation indicates that the battery is broken and needs to be replaced.

  When the current drops below 1A or charging exceeds 24 hours, it indicates that charging is in progress and can be stopped.


Read recommendations:

Lithium Battery GN60120

What is the effect of lithium battery set polar tablets on battery performance.51.2v solar energy st

powerwall lifepo4 battery for solar system.What is the lifespan of lithium-ion batteries?

3.7V Lithium Polymer Battery company

AG1 battery

602030 lipo battery

Return to List

18650 battery lithium ion 2200mah